HL-2140

FAQs & Troubleshooting

FAQs & Troubleshooting

Can I check the remaining life of the printer's drum unit?

The Printer Settings page lists the remaining life of the drum unit. Follow the steps below to print the Printer Settings page:

  1. Make sure the printer is powered on. The power switch is located on the right side of the printer. The printer should be in Ready mode with the blue Ready light on steady.
  2. Press the Go button three times to print the Printer Settings page.

The yield of the DR-360 drum unit is approx. 12,000 pages A4/Letter (1 page / job).

The Remaining Life of the Drum will be accurate if you reset the drum counter ONLY when you install a NEW drum unit. If you reset the drum counter during the life of a USED drum, then the Drum Life will NOT be accurate.

Even if the Remaining Life of the Drum is displayed as 0%, you can continue to use your current drum unit.  For the best print quality, it's better to replace the drum unit with a new one.


 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2140, HL-2170W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.