DCP-8085DN

FAQs & Troubleshooting

White spots or black spots at 3.7 in. (94 mm) intervals

Print Quality Problem - Spots at 94mm intervals

Make ten copies of a blank, white sheet of paper.
If the problem is not solved, the drum unit may have glue from a label stuck on the OPC drum surface. Clean the drum unit.
> Click here to see the details of how to clean the drum unit.
The drum unit may be damaged. Put in a new drum.
> Click here to see the details of how to replace the drum unit.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

DCP-8070D, DCP-8080DN, DCP-8085DN, DCP-8110DN, DCP-8112DN, DCP-8150DN, DCP-8152DN, DCP-8155DN, DCP-8157DN, MFC-8480DN, MFC-8510DN, MFC-8512DN, MFC-8680DN, MFC-8690DW, MFC-8710DW, MFC-8712DW, MFC-8810DW, MFC-8890DW, MFC-8910DW, MFC-8912DW, MFC-8950DW, MFC-8950DWT, MFC-8952DW, MFC-8952DWT

Content Feedback

To help us improve our support, please provide your feedback below.

FAQs & Troubleshooting

White spots or black spots at 3.7 in. (94 mm) intervals

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Content Feedback

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Support & Downloads

DCP-8085DN

Other countries(English)