MFC-J4410DW
![]() |
FAQs & Troubleshooting |
Print a report that will show a listing of faxes I sent and received.
The Fax Journal report lists information about the last 200 incoming and outgoing faxes. Using this report, you can tell the date and time each fax was sent or received, the name or number the fax was sent to or received from (provided the Station ID has been set), and whether or not the transmission was successful. When the 201st fax is sent or received, the 1st fax is deleted from memory.
On the Fax Journal, TX indicates a fax you sent, while RX indicates a fax you received.
You can print this report on demand by following these steps:
- Press
(Settings).
- Press the Up or Down arrow key to display Print Reports.
- Press Print Reports.
- Press Fax Journal.
- Press Start.
- Press
.
In addition, you can set the Brother machine to print the Fax Journal report at regular intervals (every 50 faxes; every 6, 12, or 24 hours; every 2 or 7 days). The default setting is every 50 faxes. To set or change the interval at which the Fax Journal report prints, follow these steps:
- Press
(Settings).
- Press the Up or Down arrow key to display Fax.
- Press Fax.
- Press the Up or Down arrow key to display Report Setting.
- Press Report Setting.
- Press Journal Period.
- Press the Up or Down arrow key to display the intervals.
- Press the option you want to set.
If you choose Every 50 Faxes, go to Step 11.
- 6, 12, 24 hours, 2 or 7 days.
The machine will print the report at the chosen time and then erase all jobs from its memory. If the machine's memory becomes full with 200 jobs before the time you chose has passed, the machine will print the Fax Journal report early and then erase all jobs from the memory. If you want an extra report before it is due to print, you can print it without erasing the jobs from the memory
- Every 50 Faxes
The machine will print the Fax Journal report when the machine has stored 50 jobs.
- 6, 12, 24 hours, 2 or 7 days.
- Enter the time you want the report to begin printing in 24-hour format. Press OK.
(For example, enter 19:45 for 7:45PM. )
If you chose 12h Clock in the Date & Time setting, enter the time in 12-hour format, and then press AM or PM.
- If you chose Every 7 Days, press the first day for the 7-day countdown.
- Press
.