DCP-T220
 |
FAQs & Troubleshooting |
Reset Your Machine
The following reset functions are available.
Machine Reset
You can reset all the machine’s settings that you have changed, such as Date and Time.
- Press
(Detener (Stop)) and Inicio Negro (Black Start) simultaneously. The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking. - Press and hold Inicio Negro (Black Start) for two seconds.
- Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from the power source.
Network (DCP-T420W/DCP-T425W/DCP-T426W)
Reset the print server back to its default factory settings (includes Password and IP Address information).
- Press WiFi Button/LED and(Detener (Stop)) simultaneously. The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts blinking.
- Press and hold Inicio Color (Color Start) for two seconds.
- Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from the power source.
All Settings
Use this reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
- Press(Detener (Stop)) and Inicio Negro (Black Start) simultaneously. The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking.
- Press and hold Inicio Color (Color Start) for two seconds.
- Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from the power source.
Content Feedback
To help us improve our support, please provide your feedback below.
