DCP-7060D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 06/20/2012
  • ID: faq00000231_037

Envelope creases

Print Quality Problem - Envelope creases

 

Please check the following points to solve the problem:

 

NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.

  • Open the back cover and make sure that the two green envelope levers inside the back cover are pulled down when you print the envelope. The back cover should remain open when printing envelopes.

    envelop levers

If the Creases / Wrinkling still remain, please select Plain Paper in the printer driver settings.
It may be possible to remove some print by rubbing the surface of the envelope when the media type is set as Plain Paper.


When you have finished printing, reset the two green levers back to their original position. Close the back cover.

green levers back


 

Click here to view other examples of print quality issues.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055, DCP-7055W, DCP-7060D, DCP-7065DN, FAX-2840, FAX-2940, HL-2280DW, MFC-7240, MFC-7360N, MFC-7365DN, MFC-7460DN, MFC-7860DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit