DCP-7060D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 02/04/2011
  • ID: faq00000219_021

Black toner marks across the page

Print Quality Problem - Black toner marks across the page

 

Please check the following points to solve the problem:

  • If you use label sheets for laser printers, the glue from the sheets may sometimes stick to the OPC drum surface. Clean the drum unit.
    Please refer to the instructions, "Clean the drum unit."

  • Make sure that you use paper that meets our specifications.
    Please refer to FAQs, "What kind of paper can I use?" and "What is the recommended paper?"

  • Do not use paper that has clips or staples because they will scratch the surface of the drum.

  • If the unpacked drum unit is in direct sunlight or room light, the unit may be damaged.

  • The toner cartridge may be damaged. Put in a new toner cartridge.
    Please refer to the instructions, "REPLACE TONER".

  • The drum unit may be damaged. Put in a new drum unit.
    Please refer to the instructions, "REPLACE DRUM".

 

Click here to view other examples of print quality issues.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055, DCP-7055W, DCP-7060D, DCP-7065DN, DCP-8110DN, DCP-8112DN, DCP-8150DN, DCP-8152DN, DCP-8155DN, DCP-8157DN, FAX-2840, FAX-2940, HL-2280DW, HL-5440D, HL-5450DN, HL-5452DN, HL-5470DW, HL-5470DWT, HL-5472DW, HL-5472DWT, HL-6180DW, HL-6180DWT, HL-6182DW, HL-6182DWT, MFC-7240, MFC-7360N, MFC-7365DN, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8512DN, MFC-8710DW, MFC-8712DW, MFC-8810DW, MFC-8910DW, MFC-8912DW, MFC-8950DW, MFC-8950DWT, MFC-8952DW, MFC-8952DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit