DCP-T420W(-V)

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/01/2024
  • ID: faq00000105_524

Reset the Network Settings to Factory Settings

You can use the buttons on the control panel to reset your machine to its factory settings. This resets all information, such as the password and IP address.
image
You can also reset the print server to its factory settings using Web Based Management.
  1. Press WiFi Button/LED and image(Detener (Stop)) simultaneously.
    The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts blinking.
  2. Press and hold Inicio Color (Color Start) for two seconds.
  3. Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from the power source.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T420W(-V), DCP-T426W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit