MFC-J4610DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Load envelopes into my machine


  • Use envelopes that weigh from 20 to 25 lb (80 to 95 g/m2).
  • Some envelopes need margin settings to be set in the application. Make sure you do a test print first before printing many envelopes.

Do not use the following types of envelopes, as they will not feed correctly:

  • That are of a baggy construction.

  • That have windows.

  • That are embossed (have raised writing on them).

  • That have clasps or staples.

  • That are pre-printed on the inside.

Occasionally you may experience paper feed problems caused by the thickness, size, and flap shape of the envelopes you are using.



Step 1: Load envelopes:

NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.

  1. Before loading, press the corners and sides of the envelopes to make them as flat as possible.

    If the envelopes are "double-feeding," put one envelope in the paper tray at a time.

  2. Put envelopes in the paper tray with the address side down. If the envelope flaps are on the long edge, load the envelopes with the flap on the left, as shown in the illustration. Gently press and slide the paper guides (1) to fit the size of the envelopes.

    image

    • If you are using envelopes with the flap on the short edge, insert envelopes in the paper tray as shown in the illustration.

      image
    • If you are using envelopes with the flap on the short edge, close the paper support flap.

      image






Step 2: Change the printer driver settings:


For Windows users

  1. Open Printing Preference. (Click here to see the details of how to open Printing Preferences.)

  2. Choose an appropriate size for Paper Size and click OK.

    image

    If you have problems when printing on envelopes, try the following suggestions:

    1. Open the envelope flap.

    2. Put the envelope into the paper tray with the address side down and the flap positioned as shown in the illustration.

      image

    3. Open Printing Preference. (Click here to see the details of how to open Printing Preferences.)

    4. Open Advanced tab and choose Reverse Print in the printer driver's dialog box, and then adjust the size and margin in your application.

      image

For Mac OS X users

  1. Open Print dialog. (Click here to see the details of how to open Print dialog.)

  2. Choose an appropriate size for Paper Size.

    image



    If you have problems when printing on envelopes, try the following suggestions:

    1. Open the envelope flap.

    2. Put the envelope into the paper tray with the address side down and the flap positioned as shown in the illustration.

      image

    3. Open Print dialog. (Click here to see the details of how to open Printing Preferences.)

    4. Choose Layout in the Print dialog box.

      image


    5. Choose Reverse page orientation in the printer driver's dialog box, and then adjust the size and margin in your application.

      image

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.