Installing the battery
- Do not use this printer with any rechargeable battery other than that specified (BT-100). Doing so may result in fire or damage.
- Do not disassemble the rechargeable battery.
The battery connector should not be frequently unplugged and reconnected, otherwise it may be damaged or the battery cord may break.
The battery must be removed only when replacing it at the end of its service life, or when the printer will not be used for a long period of time.
Press the area indicated by (1) on the battery cover (2) and slide it off the printer.
Insert the connector (1) of the battery in the direction shown at right.
- Insert the connector fully, without using excessive force.
- Pay attention to the battery cord colors and be sure you insert the connector in the correct orientation, otherwise it may be damaged.
Fit the battery cord into the groove as shown in the illustration.
Install the battery cover by sliding it onto the back of the printer.
Be careful that you do not let the battery cover pinch the battery cord.
To help us improve our support, please provide your feedback below.