MFC-L8900CDW

FAQs & Troubleshooting

Unpack your Brother machine

Follow the steps below to unpack the machine:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

Cut the plastic straps.
Remove all of the plastic box joint caps.
Lift to remove the box lid.
Remove the power cord.
Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
Remove the telephone line cord.
Remove the packing foam.
Lift the machine using two people, remove the rest of the box, and place the machine on a flat surface.

To prevent possible injuries, at least two people should lift the machine.
Remove the plastic bag.
Open the document cover and remove the plastic sheet.
Peel off all blue tape.
Open the front cover.
Pull out the drum unit and toner cartridge assembly.
Remove all the orange packing material from the drum unit and toner cartridge assembly.
Peel off all blue tape.
Make sure you remove all the orange packing material from the drum unit and toner cartridge assembly.
Place the drum unit and toner cartridge assembly back into the machine.
Close the front cover.
Peel the blue tape from the paper support flap.
Pull the paper tray out of the machine.
Remove the silica gel pack from the paper tray.
Push the paper tray completely into the machine.