MFC-L5850DW
 |
FAQs & Troubleshooting |
Save Scanned Data to your folder when the network security feature is enabled. (Active Directory® Authentication / LDAP Authentication)
If Active Directory® Authentication or LDAP Authentication is enabled, you can scan documents and send them to your folder (User's Home Directory).
NOTE: The screens may differ depending on operating system being used and your Brother machine.
- Before Configuring Scan to My Folder
- Configure Active Directory® Authentication or LDAP Authentication
- Enable Send to My Folder
- Save Scanned Data to your Folder
STEP I: Before Configuring Scan to My Folder
In order to use the Scan to My Folder the machine must have the required version firmware (Main: L / Sub: 1.14 or later).
> Click here to see how to check the firmware version.
If your machine's firmware version is earlier than Main: L / Sub: 1.14, update the machine's firmware.
> Click here to download the Firmware Update Tool and see more information in the Downloads section.
STEP II: Configure Active Directory® Authentication or LDAP Authentication
This function can be enabled when Active Directory Authentication or LDAP Authentication is active.
Configure the network security features that are applicable for your case.
> Click here to see how to configure Active Directory® Authentication using Web Based Management.
> Click here to see how to configure LDAP Authentication using Web Based Management.
STEP III: Enable Send to My Folder
Enable Send to My Folder using Web Based Management.
- Click the Scan tab.
- Click the Scan to FTP/SFTP/Network/SharePoint menu in the left navigation bar.
- In the Send to My Folder field, choose On.
-
Click Submit.
- Close the web browser.
STEP IV: Save Scanned Data to your Folder
Scan documents and save them to a folder on your computer.
- Load your document.
-
On the machine's control panel, use the machine's display (hereinafter called Touchscreen) to enter your User ID and Password, and then press OK.
- Press Scan.
-
Swipe left or right to move to My Folder, and then press to My Folder.
-
Press Start.
The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen instructions to complete the scanning job.
