MFC-L2740DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Clean the corona wire

Follow the steps below to clean the corona wire.

 

  1. Open the front cover.
    OpenFrontCover
  2. Remove the toner cartridge and drum unit assembly from the machine.
    RemoveTonerCartridge
  3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
    Clean the corona wire

    Be sure to return the tab to the Home position (Home position). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe.

  4. Install the toner cartridge and drum unit assembly back into the machine.
    InstallToner
  5. Close the front cover of the machine.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-L2520DW, DCP-L2540DW, HL-L2380DW, MFC-L2680W, MFC-L2685DW, MFC-L2700DW, MFC-L2705DW, MFC-L2707DW, MFC-L2720DW, MFC-L2740DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.