MFC-J995DW(XL)

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/22/2019
  • ID: faq00100364_506

Correct the Paper Feed to Clear Vertical Lines

Adjust the paper feed to reduce vertical lines.

MFC-J805DW/MFC-J815DW

  1. Press Settings.
  2. Press or to make your selections:
    1. Select [General Setup]. Press OK.
    2. Select [Maintenance]. Press OK.
    3. Select [Impr. PrintQuality]. Press OK.
    4. Select [Correct Paper Feed]. Press OK.
  3. Press , and then follow the instructions on the LCD.

MFC-J995DW

Before adjusting the paper feed, make a print quality check first by pressing [Settings]>[Maintenance]>[Improve Print Quality]>[Check Print Quality].

  1. Press [Settings]>[Maintenance]>[Improve Print Quality]>[Correct Paper Feed].
  2. Press [Next].
  3. Press [Yes] after a confirmation message if a print quality check has been completed appears on the LCD.
  4. Press [Auto] or [Manual].
    • If you select the [Auto] mode, the paper feed is automatically adjusted by scanning the adjustment sheet.
    • If you select the [Manual] mode, you need to input information printed on the adjustment sheet manually.
  5. If you selected the [Auto] mode, select the paper size to print the adjustment sheet on.
  6. Load specified size paper in the tray, and then press [Start].
    The machine prints the adjustment sheet.
  7. Follow the instructions on the LCD.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J805DW(XL), MFC-J815DW XL, MFC-J995DW(XL)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit