MFC-9970CDW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 06/20/2012
  • ID: faq00002565_004

Adjust my Brother machine's volume settings.

Your Brother machine has three adjustable volume settings: Ring Volume, Beeper Volume, and Speaker Volume.


Changing Ring Volume

You can change the machine's Ring Volume by following these steps:
  1. Press Menu on the screen.
  2. Press the Up or Down arrow key to display General Setup.
  3. Press General Setup.
  4. Press the Up or Down arrow key to display Volume.
  5. Press Volume.
  6. Press Ring.
  7. Press Low, Med, High, or Off.
  8. Press Stop/Exit.

Changing Beeper Volume

You can set the machine's Beeper Volume to Low, Medium, High, or Off. When the Beeper Volume is set to Low, Medium, or High, the machine beeps every time you press a key or make an error, and at the end of the sending and receiving processes.

To change the machine's Beeper Volume, follow these steps:
  1. Press Menu on the screen.
  2. Press the Up or Down arrow key to display General Setup.
  3. Press General Setup.
  4. Press the Up or Down arrow key to display Volume.
  5. Press Volume.
  6. Press Beeper.
  7. Press Low, Med, High, or Off.
  8. Press Stop/Exit.

Changing Speaker Volume

You can change the machine's Speaker Volume by following these steps:
  1. Press Menu on the screen.
  2. Press the Up or Down arrow key to display General Setup.
  3. Press General Setup.
  4. Press the Up or Down arrow key to display Volume.
  5. Press Volume.
  6. Press Speaker.
  7. Press Low, Med, High, or Off.
  8. Press Stop/Exit.

You can also change the Speaker Volume by pressing Fax, then pressing Volume on the screen.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-9970CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit