MFC-9840CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I clear the message "Jam Tray 1" or  "Jam Tray 2" from the LCD display?

To clear paper jams, please follow the steps below.

 


  1. Pull the paper tray completely out of the machine.

The LCD names for the paper trays are as follows.

  • Standard paper tray: Tray 1
  • Optional lower tray: Tray 2

  1. Use both hands to slowly pull out the jammed paper. Make sure the full page comes out.
  1. Make sure the paper is below the maximum paper mark (1). While pressing the green paper - guide release lever (2), slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
  1. Put the paper tray firmly back in the machine.

DO NOT take out the standard paper tray while paper is feeding from a lower paper tray as this will cause a paper jam.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9045CDN, MFC-9840CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.