MFC-8710DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Hollow print

Print Quality Problem - Hollow print

 

Please check the following points to solve the problem:

  • Make sure that you use paper that meets our specifications.
    Please refer to the FAQs "What kind of paper can I use?" and "What is the recommended paper?"
     
  • Choose Thick Paper mode in the printer driver.
    Or use thinner paper than you are currently using.
     
  • Check the machine's environment. Conditions such as high humidity can cause hollow print.
    Please refer to Safety and Legal Guide or Product Safety Guide available on the Manuals section.
     
  • The drum unit may be damaged. Put in a new drum unit.
    Please refer to the FAQ "Replace Drum".
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7060D, DCP-7065DN, DCP-8110DN, DCP-8150DN, DCP-8155DN, FAX-2840, FAX-2940, HL-2280DW, HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT, MFC-7240, MFC-7360N, MFC-7365DN, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.