HL-L6400DW(T)

FAQs & Troubleshooting

FAQs & Troubleshooting

Reset the Drum Counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
IMPORTANT
DO NOT reset the drum counter unless you are replacing the drum unit.

HL-L6250DW

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
  4. Press for [Reset] to reset the drum counter.
  5. Close the front cover of the machine.

HL-L6400DW/HL-L6400DWT

  1. Make sure the machine is turned on.
  2. Press [Settings]>[Machine Information]>[Parts Life].
  3. Press and hold [Drum Life].
  4. Press [Yes].
  5. Press .

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L6250DW, HL-L6400DW(T)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.