M5612301 appears on the Artspira app screen.

Error Message

The printer cannot be connected. Search for the printer again. (M5612301)

 

  • Cause
    This message is displayed when "Printing Patterns" under "Printing" in "New" is selected in an environment where there is no wireless LAN signal.
     
  • Solutions
    The printer and the Artspira device must be connected when printing. Make sure they are connected to the same network.

    For example, make sure the printer and access point are turned on, the printer is connected to the network, the device is not too far from the access point, and the wireless LAN signal is properly received.
  • "Printing Patterns" is available when a Creative Printer is set in the device settings.
  • This function is not available in some countries or regions.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is NQ1700E, Innov-is NQ3550W, Innov-is NQ3700D, Innov-is NS1250E, Innov-is NS1850D, Innov-is NS2850D, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP2, Innov-is XP3, LB5500, PE545, PE570, PE900, PP1, PR1055X, PR680W / PR680WC, SDX125, SDX125e, SDX125e Titanium, SDX125i, SDX125TS, SDX135PRO, SDX225, SDX225F, SDX230D, SDX230Di, SDX230DX, SDX325, SDX330D, SDX85, SDX85C, SDX85M, SDX85S, SE2000, SE700, SE725, SP-1

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.