About the Roll Feeder


This FAQ is described the flow about how to use of the optional accessory “Roll Feeder Attachment”.
For details on each step, refer to the linked FAQs.

 

 

  1. Activate the roll feeder function on the CanvasWorkspace.

    Refer to How to Activate an Accessory Kit* (Rhinestone, Emboss Kit, etc.) for the Cutting Machine.



     
  2. Startup CanvasWorkspace to create the data for the roll feeder.
    The data for the roll feeder cannot be created on CanvasWorkspace(Web).
    Create the data on CanvasWorkspace.
    If the CanvasWorkspace is not installed on your computer, click here to download the application.


     

  3. Create the data.

     

    When the data is completed, send it to the cutting machine from the CanvasWorkspace.

    For details, refer to Instructions for Creating Roll Feeder Data with CanvasWorkspace and Sending It to the Cutting Machine.


     

     
  4. Install the roll feeder and rolled material onto the machine.

    For details, refer to How to Install the Roll Feeder.




     
  5. Retrieve the roll feeder data on the cutting machine and cut.

    For details, refer to Retrieving Roll Feeder Data On the Machine and Cutting.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

SDX125, SDX125e, SDX125e Titanium, SDX125i, SDX125TS, SDX135PRO, SDX225, SDX225F, SDX230D, SDX230Di, SDX230DX, SDX325, SDX330D, SDX85, SDX85C, SDX85M, SDX85S

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.