How do I remove or attach the presser foot ?

  • Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the foot controller or the start/stop button is accidentally pressed and the machine starts sewing.
  • Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break.

  • Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine.


  1. Press image  (needle position button) once or twice to raise the needle.




  2. Turn off the sewing machine.




  3. Raise the presser foot lever.

    image (1) Presser foot lever
  4. Press the black button at the back of the presser foot holder in order to remove the presser foot.

    image (1) Black button

    (2) Presser foot holder

  5. Place a different presser foot below the holder so that the presser foot pin is aligned with the shank in the holder.
    image (1) Presser foot holder

    (2) Shank

    (3) Pin


  6. Slowly lower the presser foot lever so that the presser foot pin snaps into the shank in the presser foot holder.
    image (1) Presser foot lever

    (2) Presser foot holder

    (3) Shank

    (4) Pin


  7. Raise the presser foot lever to check that the presser foot is securely attached.



If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

BX2925PRW, CE8100, CP-6500, CP-7500, CS-6000/6000b/6000t/6000i, CS7000i, CS7130, CS7205, CS9100, DZ2400, DZ2750, DZ3000, DZ3400, HC1850, HS-2000, HS-2500, HS-3000, PS300T, SB1000T, SB700T, SC3000, SC9500, SM8270, SQ-9000, SQ9050, SQ9185, SQ9285, SQ9310, XR1300, XR1355, XR3140, XR3240, XR3340, XR-7700, XR-9000, XR9500PRW, XR9550/XR9550PRW, XS2070, XS2080, XS2100, XS3109

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.