PR680W / PR680WC

FAQs & Troubleshooting

FAQs & Troubleshooting

How to access setting screens (when administrator lock is enable)

Before enabling administrator lock

For detail see, "How to configure to administrator lock".

After enabling administrator lock

When administrator lock is enabled, key symbols appear on the settings keys.
A 6-digit passcode must be entered in order to access the settings screen after touching its settings key.

  1. Touch img01 .
    The administrator passcode input screen appears.
    • The same happens if img02 or img03 is touched.
  2. Type in the 6-digit passcode.
    If the correct passcode was entered, the settings screen can be accessed.
    • If the wrong passcode is entered 10 times, the passcode will be reset and return to the initial passcode (999999).

Canceling administrator lock

  1. Touch img05 .
    The general settings screen appears.
  2. Locate [Passcode Setting] in the Settings pages.
  3. Touch [OFF] beside [Admin Lock].

  4. Touch img07 .
    Administrator lock is canceled, and the key symbols are removed from the settings keys.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PR680W / PR680WC

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.