PR680W / PR680WC

FAQs & Troubleshooting

FAQs & Troubleshooting

How to configure administrator lock

  1. Touch img01 , then img02 .
    The general settings screen appears.
     
  2. Locate [Passcode Setting] in the Settings pages.

    Touch img03 (Previous page key) or img04 (Next page key) to display Passcode Setting Screen.

  3. Touch [ON] beside [Admin Lock].

    img05
    • To change the passcode, continue with step 4.
    • If the passcode will not be changed, continue with step 8. (The initial passcode is 999999.)
  4. Touch img06 beside [Admin Lock].
     
  5. Type in the new passcode (6 digits).
    img07
     
  6. Type it in again for confirmation.
    • If a mistake was made while typing, start over with the first digit.
    img08
     
  7. Touch img09 .
    img10
     
  8. Touch img11 .

    img12
    Administrator lock is enabled, and key symbols appear on the settings keys.
    Afterwards, each time a settings key is touched, the 6-digit passcode must be entered.

    "Setting key" and "Wireless LAN settings".
    img13
    "Needle attribute setting key" in the Needle bar/Frame move screen.
    img14

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PR680W / PR680WC

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)