How do I remove or attach the Embroidery foot ?

Only use embroidery feet designed specifically for this machine. Use of any other embroidery foot may result in injuries or damage to the machine.

 

  1. Press img01 (Needle position button) once or twice to raise the needle.


     
  2. Press img02 .
    >>The screen changes, and all keys and operation buttons are locked (except img03 ).
    img04

     
  3. Raise the presser foot lever, use the included screwdriver to loosen the embroidery foot screw, and then remove the embroidery foot.
    img05 (1) Screwdriver
    (2) Embroidery foot screw
    (3) Embroidery foot


     
  4. Hold the embroidery foot “Q” with your right hand, as shown.
    Hold the embroidery foot with your index finger wrapped around the lever at the back of the foot.
    img06 (1) Lever
    (2) Embroidery foot bar


     
  5. While pressing in the lever on embroidery foot “Q” with your finger, fit the embroidery foot bar over the needle clamp screw.
    img07 (1) Embroidery foot bar
    (2) Needle clamp screw
    (3) Presser bar



     
  6. Secure embroidery foot “Q” with the embroidery foot screw, making sure that embroidery foot “Q” is vertical.
    img08 (1) Mounting notch
    (2) Embroidery foot screw



     
  7. Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the embroidery foot screw.
    img09

    Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the presser foot and possibly cause injury.



     
  8. Slowly lower the presser foot lever.



     
  9. Raise the presser foot lever to check that the embroidery foot is securely attached. 


     

  10. Press img10 to unlock all keys and buttons.
    img11


     

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PE535, PE545, PE550D, PE570

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.