Innov-is XJ1

FAQs & Troubleshooting

FAQs & Troubleshooting

The App shows the message "Connection to the machine failed. Please reestablish the connection between the device and the machine."

This message is displayed when the WLAN connection to the machine could not be established due to poor WLAN condition.

Check if the wireless connection from the smart device to the machine is working properly.

 

  • Make sure that the wireless connection function is enabled on the machine.
    Check the following FAQ and Manuals to enable the wireless connection.

    How to set up the wireless network connection with the wizard on the machine

    Go to the Manuals section

    Make sure the smart device's Wifi connection is enabled. And make sure if it connect with same network as machine.
    If the wireless connection is disconnected, connect again.


     
  • The wireless connection condition is poor.
    Bring the connected device and machine closer to the access point installation location.
    Try the communication in a place where there are few obstacles between the access point, the device and the machine.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is XE1, Innov-is XJ1

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.