Innov-is VE2300

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I specify the embroidering location with the sensor pen?
(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)

The following is the procedure specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.
For example, this method is useful when you want to place the name along a line on a fabric.
This function can be performed in either "Embroidery" or "Embroidery Edit" mode, but the procedure described below is performed in "Embroidery" mode.


Normally, you will take the easy way to select the pattern center for specifying the embroidery location.

If you want to specify the embroidery location at the pattern center, refer to the procedure specifying the location by selecting the pattern center with the sensor pen. >>> Click here


Procedure for specifying the embroidery pattern location by selecting the Embroidering Position by the Pattern Edge

The following procedure describes how to place the character pattern along the line specifying the left bottom corner of the character pattern with the sensor pen.

fig000

(1) Character pattern
(2) Line which you want to place the pattern along
(3) Left bottom corner of the character pattern


  1. Turn on the machine.

  2. Display the Embroidery screen.

  3. Select the category of the character pattern and the key of the font you desire.

  4. In the text input screen, enter the characters you want to embroider.

  5. Press EMBROIDERY key.

  6. Hoop the fabric and attach the embroidery frame to the machine.

    * Refer to "Hooping the Fabric in the Embroidery Frame" and "ATTACHING THE EMBROIDERY FRAME" on the operation manual.

  7. Press sf_key (Sensor function key).

    fig007_1


    When you use the extra large embroidery frame, select the desired area and press OK key.

    fig007_2


  8. Press OK key.

    fig008_1


    * The message in the screen may vary depending on the embroidery pattern.


    fig008_2


  9. The embroidering position selection screen appears.

    fig009


  10. Press the key on the left bottom from ed_keys on the screen.

    fig010


  11. Press OK key.

    fig011_1


    * The following screen appears.


    fig011_2


  12. With the sensor pen, touch the point on the fabric corresponding to corner (1) in the screen to set the left bottom corner of the character pattern.

    fig012_1

    (1) Left bottom corner of the pattern


    * Specified point number turns into red.
       (1)_black (black) >>> (1)_red (red)


    fig012_2


    If you touch the invalid sewing area with the sensor pen, the following message appears.
    Press CLOSE key and touch the point again within the sewing area with the sensor pen.


    fig012_3


  13. With the sensor pen, touch the point on the fabric corresponding to the number (2) in the screen to set the angle of the pattern.

    fig013_1

    (2) The point on the line which you want to place the pattern along


    * Specified point number turns into red.
       (2)_black (black) >>> (2)_red (red)


    fig013_2


  14. Press adj_key (Position adjustment key) to adjust the positions.

    fig014_1


    If you don't need to adjust the positions, press OK key and continue to step 20.

    fig014_2


  15. Press OK key.

    fig015


  16. Press arw_keys to move the LED pointer on the fabric for adjusting the first position.

    fig016


  17. Press OK key to apply the setting.

    fig017


  18. Press arw_keys to move the LED pointer on the fabric for adjusting the second position.

    fig018


  19. Press OK key to apply the setting.

    fig019


  20. If the following message appears, press OK key.

    fig020_1


    If the specified pattern position extends out of the pattern area, the following message appears instead of above message.
    Press CLOSE key and specify the pattern position again within the embroidery field.


    fig020_2


  21. The preview in the sewing screen is updated according to the specified embroidering position.

    fig021


  22. Press the "Start/Stop" button to start embroidering.

 

top top

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is VE2200, Innov-is VE2300, Innov-is VM6200D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.