1034D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 12/24/2015
  • ID: faqh00000495_000

Before threading

  1. Turn off the main power switch for safety.

    image

     

  2. Raise the presser foot using presser foot lever.

    image

    When threading the needle, always be sure to lift the presser foot lever, and also take care to thread in the proper order.

  3. Set the needle bar in its highest position by turning the handwheel toward you.
    Turn the handwheel to find the easiest position for threading, and then thread the upperlooper thread, lowerlooper thread, right needle thread and then the left needle thread.
    The proper threading order for this serger is upperlooper, lowerlooper, right needle, and then the left needle.

    image

    image

    (1) Slide to the right
    (2) Thread tension discs
    (3) Correct
    (4) Wrong

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

1034D, 1134DW/ 1134D, 1634D, DZ1234, DZ1234

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit