ADS-2700W

FAQs & Troubleshooting

FAQs & Troubleshooting

Your Scanner Cannot Be Detected on the Network During Installation

Cause Action Interface
Your computer is not connected to the network.

Make sure your computer is connected to a network, for example, a LAN environment or Internet services. For further support, contact your network administrator.

Wired/Wireless
Your machine is not connected to the network.

(Wired network)

Press Settings > Network > Wired LAN > Wired Status > Status. If the LCD displays Auto or Off, ask your network administrator whether your IP address is valid or not.

(Wireless network)

Press Settings > Network > WLAN > WLAN Status > Status. If the LCD displays Connection Failed:, ask your network administrator whether your IP address is valid or not.

Wired/Wireless
You use security software.
  • In the installer dialog box, search for the Brother machine again.
  • Allow access when the alert message of the security software appears during the Brother Device installation.
  • The following port numbers are used for Brother network features:
    • Network scanning, Remote Setup

      Port number 5566/Protocol TCP

    • Network scanning (Brother iPrint&Scan)

      Port number 54921/Protocol TCP

    • BRAdmin Light

      Port number 161/Protocol UDP

  • For more information about security software, see Related Information: Your Brother Machine Cannot Scan over the Network
Wired/Wireless
You use a Wi-Fi router.

The privacy separator on your Wi-Fi router may be enabled. Disable the privacy separator.

Wireless
Your Brother machine is placed too far from the Wireless access point/router. Place your Brother machine within about 3.3 feet (1 meter) of the Wireless access point/router when you configure the wireless network settings. Wireless
There are some obstructions (walls or furniture, for example) between your machine and the Wireless access point/router. Move your Brother machine to an obstruction-free area, or closer to the Wireless access point/router. Wireless
There is a wireless computer, Bluetooth-supported device, microwave oven, or digital cordless phone near the Brother machine or the Wireless access point/router. Move all the devices away from the Brother machine or Wireless access point/router. Wireless

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-2700W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.