TJ-4422TN

FAQs & Troubleshooting

FAQs & Troubleshooting

How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)

 

  1. Double-click the BPM icon to start the tool.

    Make sure that the printer and your computer are connected with USB cable. BPM is not available via Bluetooth®.

  2. The print position can be adjusted variously depending on the combination of values for Reference field and Direction field.
    Referring to the following examples, enter the appropriate values and click [Set].

    For 200 dpi printer: 1 mm = 8 dots
    For 300 dpi printer: 1 mm = 12 dots


    The example for 200 dpi printer (1 mm = 8 dots)
    If you want the printout to shift right (toward the feed direction) for 8 mm as below,
    Reference Point
    1 = Reference point for Direction 0, 0

    2 = Feed direction

    enter "64" in the left side of the [Reference] field. (8 mm x 8 dots = 64 dots)
    <Setting : Reference X=64, Y=0   Direction 0, 0 >
    printer configuration


    The example for 300 dpi printer (1 mm = 12 dots) 
    If you want the printout to shift up (toward the feed direction) for 8 mm as below,
    Reference Point
    1 = Reference point for Direction 1, 0

    2 = Feed direction

    enter "96" in the right side of the Reference field (8 mm x 12 dots = 96 dots), and enter "1" in the left side of the Direction field.
    <Setting : Reference X=0, Y=96   Direction 1, 0 >
    Printer Configuration
     

  3. Try to print.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

RJ-2035B, RJ-2055WB, RJ-3035B, RJ-3055WB, TD-4420TN, TD-4520TN, TD-4650TNWB, TD-4750TNWB, TJ-4010TN, TJ-4020TN, TJ-4021TN, TJ-4120TN, TJ-4121TN, TJ-4420TN, TJ-4422TN, TJ-4520TN, TJ-4522TN, TJ-4620TN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.