PT-P950NW

FAQs & Troubleshooting

FAQs & Troubleshooting

Changing your printer’s network settings (IP address, Subnet mask and Gateway) using the BRAdmin Light utility

The BRAdmin Light utility is designed for the initial setup of Brother network connectable devices.
It can also search for Brother products in a TCP/IP environment, show the status and configure basic network settings, such as the IP address.
This utility is available for Windows users only.
 

Installing BRAdmin Light

 

  1. Go to the [Downloads] page.
  2. Select your OS and the applicable OS version, and then click [Search].
  3. Download [BRAdmin Light] and install it.
  • You may be asked for the default login password depending on your model.
    The default login password is preceded by "Pwd" and located either on the bottom of the printer or in the battery or media compartment.
    For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] page.

  • If you are using firewall, anti-spyware, or antivirus software, temporarily disable them. Once you are sure that you can print, re-enable them.

  • The node name appears in the current BRAdmin Light window. The default node name of the print server in the printer is “BRW[your printer’s Ethernet Address]".

 

Setting the IP address, Subnet Mask and Gateway using BRAdmin Light
 

  1. Start the BRAdmin Light utility.

    For Windows 11 / Windows 10 / Windows Server 2019 / Windows Server 2016:
    Click [Start Menu] - ([All apps] - [Brother] -) [BRAdmin Light].

    For Windows 8 /8.1 / Windows Server 2012/2012R2:
    Click [BRAdmin Light] on [Apps] screen.

    For Windows 7 / Windows Vista / Windows Server 2008/2008R2:
    Click [Start] - [All Programs] - [Brother] - [BRAdmin Light] - [BRAdmin Light].
     
  2. BRAdmin Light will search for new devices automatically.

  3. Double-click the unconfigured device.
    BRAdminLightWin

    If you don’t use a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin Light utility screen.

  4. Choose [STATIC] for the [Boot Method]. Enter the [IP Address], [Subnet Mask] and [Gateway] (if needed) of your print server.
    BRAdinLightWin-NetworkSettings
     
  5. Click [OK].
     

  6. With a correctly programmed IP address, you will see the Brother print server in the device list.

If you require more advanced printer management, download the latest Brother BRAdmin Professional utility from the [Downloads] page. This utility is available for Windows users only.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-D800W, PT-E800W, PT-P750W, PT-P900W/P900Wc, PT-P950NW, TP-M5000N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.