Innov-is NS80e

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

  • Use only the adhesive-free hook-and-loop fastener tape which is designed for sewing.
  • Adhesive backed hook-and-loop fastener tape is not designed for sewing. Do not use adhesive backed hook-and-loop fastener tape. When glue adheres to the needle or the bobbin hook race, it may cause malfunction.
  • If the hook-and-loop fastener tape is sewn with the thin needle (65/9-75/11), the needle may bend or break.

Before starting to sew, baste the fabric and hook-and-loop fastener tape together.

Make sure that the needle passes through the hook-and-loop fastener tape by turning the handwheel and lower the needle into the hook-and-loop fastener tape before sewing. And then, sew the edge of the hook-and-loop fastener tape at a slow speed.

 

If the needle does not pass through the hook-and-loop fastener tape, replace the needle with the needle size for thicker fabrics. For details, refer to "Combination of fabric, thread and needle".

img01 (1) Edge of the hook-and-loop fastener tape

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is BP3500D, Innov-is BQ1350, Innov-is BQ950, Innov-is NQ1300PRW/ Innov-is NQ1300, Innov-is NQ3500D, Innov-is NQ3550W, Innov-is NQ3600D, Innov-is NQ3700D, Innov-is NQ550PRW / Innov-is NQ550, Innov-is NQ575PRW / Innov-is NQ575, Innov-is NQ700PRW/ Innov-is NQ700, Innov-is NQ900PRW/ Innov-is NQ900, Innov-is NS1750D, Innov-is NS1850D, Innov-is NS2750D, Innov-is NS2850D, Innov-is NS80e, Innov-is NS80PRW, Innov-is PS500, Innov-is PS700, LB5000, LB5500, LB7000, SB3150, SE1900, SE1950, SE2000, SE600, SE625, SE630, SE700, SE725

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.