Innov-is NQ700PRW/ Innov-is NQ700

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 04/13/2018
  • ID: faqh00101025_000

Tips for sewing thin fabrics


When sewing thin fabrics such as chiffon, the stitching may become misaligned or the fabric may not feed correctly. Move the needle (be sure to use a fine needle) to the furthest left or right hand position so that the fabric does not get pulled down into the feed dog area. If this occurs or there is shrinkage of the stitching, place non-woven water-soluble stabilizer under the fabric and sew them together.

img01

(1) Water-soluble stabilizer
(non-woven)

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is BP3500D, Innov-is BQ1350, Innov-is BQ950, Innov-is NQ1300PRW/ Innov-is NQ1300, Innov-is NQ3500D, Innov-is NQ3550W, Innov-is NQ3600D, Innov-is NQ3700D, Innov-is NQ550PRW / Innov-is NQ550, Innov-is NQ575PRW / Innov-is NQ575, Innov-is NQ700PRW/ Innov-is NQ700, Innov-is NQ900PRW/ Innov-is NQ900, Innov-is NS1750D, Innov-is NS1850D, Innov-is NS2750D, Innov-is NS2850D, Innov-is PS500, Innov-is PS700, LB5000, LB5500, LB7000, SB3150, SE1900, SE1950, SE2000, SE600, SE625, SE630, SE700, SE725

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit