DC200ULE
FAQs & Troubleshooting |
How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection? (Computer Instructions)
- A computer that can run CanvasWorkspace (Web) and connect to the network is required.
-
Connected DesignNCut machine to CanvasWorkspace (Web) , DesignNCut Manager & wireless connection is required.
If you haven't set up your wireless connection, please refer to your Connection Guide. - To use this function the machine and the computer must be on the same network that is connected to the internet.
- If the machine and computer is connected with a USB cable, you cannot register the CanvasWorkspace (Web) on DesignNCut Manager. For details on how to transfer the pattern from the computer to the machine with a USB cable, refer to How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable?
Some accessories are sold separately.
-
Login to CanvasWorkspace (Web) <https://canvasworkspace.brother.com> on the computer, and edit the pattern.
-
Click [Download] .
-
Click DesignNCut Transfer to send the pattern to the machine.
- For details on editing, transferring or downloading patterns, click in CanvasWorkspace (Web) , and then refer to“Downloading a Project” in the Help.
- When downloading a pattern using a USB cable (computer only), click Download to PC to send the pattern. For details, refer to How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable?
-
Open DesignNCut Manager.
-
Click Load data in the main window of DesignNCut Manager, and then click Load from CanvasWorkspace (Web) to import the pattern to the machine from CanvasWorkspace (Web) .
Make sure that the pattern fits the size of your choice of material fits the mat's cutting area, and it is correctly positioned. If not, please edit your file on CanvasWorkspace (Web)* as needed.
*Wireless connection is required for CanvasWorkspace (Web) .
The pattern preview window appears.(1) Select Operation
(2) Adjust the speed and pressure
For details on the appropriate speed and pressure, refer to Mat and Material Combinations(3) Test Cut
For details on the test cut, refer to How do I perform trial cutting?To open a pattern saved on the computer, click [Select file] .
-
Click [Apply] .
- Click [Start] to start the operation.