Innov-is XV8500D

FAQs & Troubleshooting

FAQs & Troubleshooting

How to Create a Pattern with Illustration Scan. [My Design Center]

Custom patterns can be created from color illustrations. You can create patterns by scanning an illustration using the included scanning frame or importing an image from USB media or a computer.

 

img

 

Recommended illustrations for Illustration Scan

 

  • Patterns that are clearly drawn, with no gradation, fading or blurriness.
  • Patterns that are at least a 5 mm square
  • Patterns that are extremely simple images

Using the Scanning Frame to Create a Pattern with Illustration Scan

 

  1. Press My Design Center (My Design Center).

    You can also start the function by pressing My Design Center in “Embroidery” mode.

     

  2. Press Illustration design key.

    img

    → The image display screen appears.
     
  3. Press " Scan ".

    img
    • To import an image from USB media or a computer, press img,  or .
      For details, Refer to "Importing the Background image" on the operation manual.
    •  
    • If you scan the image, make sure that the scan frame is attached to the machine.
      Refer to “Using the Scan Frame” on the operation manual.

    → When the following message appears, press " OK ".

    img

    → Scanning begins.
     * To stop scanning and return to the screen in step 3, press "Cancel".

     

  4. When scanning is finished, specify the necessary settings in the scan image confirmation screen.
    Change the settings to adjust the image so it can easily be converted to the desired pattern. 
    img
    (1) Max. Number of Colors The number of colors in an image will reduced less than the number specified here, and then the outline will be extracted.
    (2) Remove Background Select whether or not the background color will be included as one of the colors.
    (3) Line Select whether or not the outline will be detected as a line. A thick outline can also be detected as a region. When detected as a line, the line thickness and color can be specified.

    * To stop scanning and return to the screen in step 3, press "Cancel".

    • Press img to detect the outline. Line thickness can be specified from 1.0 mm (1/16 inch) to 5.0 mm (3/16 inch).

      img
       
    • By touching the scanned image, select the color that wanted to be detected as the outline.
       
    • The img moves to the point you touched. You can also moveimg by using img.

     

  5. Move img to frame the image for the pattern.

    img
     
  6. Press "OK".
    The screen for confirming the converted image appears.
     
  7. In the screen for confirming the converted image, adjust the image as necessary as in step 4.


    • To enlarge the image, press img.
    • To display the image before being converted, press "Original View". Compare the images before and after being converted, and then change the settings if necessary.
    • To return to the previous screen, press "Return".

    → After changes to the settings described above have been applied, "OK" changes to "Retry". Press "Retry" to check that the image is as desired.

     

  8. Press " OK ".

  9. Press " Set ".
    In this screen, the pattern can be resized, rotated or moved.

    img 

    → The pattern design editing screen for My Design Center appears.
    * To return to the previous screen, press "Return".
     

  10. Follow the procedure described on the operation manual  to Edit the Pattern as desired.

     

    img The original image is displayed in the background.

    Use gauge 1 to adjust the transparency of the background.

    Each press of img lightens the background, making the line pattern darker.
    Each press of imgdarkens the background, making the line pattern lighter.

    During scanning, the small dots that appear and unnecessary lines can be erased.

     

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is XV8500D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.