DC200ULE
 |
FAQs & Troubleshooting |
Loading and Unloading the Mat
Loading the Mat
-
Attach the material that will be cut to the mat.
-
While holding the mat level and lightly inserting it into the feed slot, press
in the operation panel.
Lightly insert the mat so that it aligns with the guides on the left and right sides of the feed slot and is tucked under the feed rollers.
 |
(1) Guides
(2) Feed rollers |
>> The mat is fed in to complete the preparations for cutting. |
Unloading the Mat
-
Press in the operation panel to feed out the mat.
-
Peel off the material from an area that is easily removable, such as a corner, and then slowly peel while maintaining an even pressure.
-
Holding the mat with your hand, use the included spatula to carefully peel off the cutout patterns carefully.
 |
(1) Spatula |
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DC200, DC200ULE
Content Feedback
To help us improve our support, please provide your feedback below.
