Innov-is NQ3600D
 |
FAQs & Troubleshooting |
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the
(Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
 |
(1) Frame-securing lever
(2) Carriage |
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
 |
(1) Embroidery frame holder
(2) Embroidery frame guide |
-
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s arrow mark with the one on holder.
 |
(1) Arrow mark |
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
Removing the Embroidery Frame
-
Press the (Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
Innov-is BP1400E, Innov-is BP3500D, Innov-is NQ1400E, Innov-is NQ1600E , Innov-is NQ1700E, Innov-is NQ3500D, Innov-is NQ3550W, Innov-is NQ3600D, Innov-is NQ3700D
Content Feedback
To help us improve our support, please provide your feedback below.
