Innov-is NS80e
 |
FAQs & Troubleshooting |
"E8" message appears on the LCD.
Cause
This message is displayed when 
(Twin needle) is turned on, and a stitch pattern that cannot be sewn with the twin needle is selected.
Solution
-
When you want to sew a pattern you selected :
Switch to the single needle mode, and replace the twin needle with a single needle before continuing the operation.
To switch to the needle mode, press 
(the needle mode selection key ).
The twin needle mode indicator changes to the single needle mode.
-
When you want to sew with the twin needle :
Select a pattern that can be sewn with the twin needle.
Refer to Stitch Chart on the operation manual to learn stitches that can be sewn with a twin needle.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
Innov-is NS80e, Innov-is NS80PRW
Content Feedback
To help us improve our support, please provide your feedback below.
