PR-620/620C/600II/600IIC

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/04/2009
  • ID: faqh00000321_000

Why cannot the needle threader be used?

The thread could be jamming due to several reasons.

  • Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible.

  • Needle is incorrect. Be sure to use the embroidery needle(s).

  • The needle is not at the correct position.
    Touch the key to move the desired needle bar to be threaded into embroidering position.

  • The hook on the automatic needle-threading mechanism is bent. Consult nearest authorized Dealer or Service Center.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PR-600/600C, PR-620/620C/600II/600IIC, PR-650/650C, PR650e/PR650eC, PR655/PR655C

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit