PE-780D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/14/2015
  • ID: faqh00000021_000

Why is the outline sewing off the pattern?

This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.

 

 

  • Improper backing material (stabilizer) is put on the fabric. 
    Thick stabilizer has to be used for elastic or thin fabric.

One Point Advice   Fabrics and stabilizer material for embroidery 

  • The fabric has to be set to the frame tight enough.

One Point Advice   Embroidery 

  • Decrease the upper thread tension manually to the basic thread tension setting or less.
 

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DZ820E, HE1, HE-120, HE-240, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 2800D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 4750D, Innov-is 500D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BP2100, Innov-is BP2150L, Innov-is VE2200, Innov-is VE2300, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, LB6770/6770PRW, LB-6800, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE500, PE525, PE540D, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, SB7050E, SB7500, SB7900E, SB8000, SE1800, SE-270D, SE-350, SE-400, SE425, ULT2001/2001N/2001C/2002D/2003D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit