If You Cannot Complete the Wireless Network Setup Configuration
Turn your wireless router off and back on. If that does not resolve the problem, try to configure the wireless settings again. If this still does not resolve the problem, use the Actions listed in this table.
Cause
Action
Interface
Your security settings (SSID/Network Key (Password)) are not correct.
Confirm your security settings.
The manufacturer's name or model number of the wireless access point/router may be used as the default security settings.
See the instructions supplied with your wireless access point/router for information on how to find the security settings.
Ask the manufacturer of your wireless access point/router, your Internet provider, or your network administrator.
Wireless
Your Brother machine's MAC address is not allowed.
Confirm that the Brother machine's MAC Address is allowed in the filter.
You can find the MAC address using the Brother machine's control panel.
Wireless
Your wireless access point/router is in stealth mode (not broadcasting the SSID).
Enter the correct Network Name (SSID) and Network Key (Password) manually.
Check the Network Name (SSID) and Network Key (Password) in the instructions supplied with your wireless access point/router and reconfigure the wireless network setup.
Wireless
Your security settings (SSID/Password) are not correct.
Confirm the Network Name (SSID) and Network Key (Password).
When you are configuring the network manually, the SSID and password are displayed on your Brother machine. If your mobile device supports the manual configuration, the SSID and password will be displayed on your mobile device's screen.
Wi-Fi Direct
You are using Android™ 4.0.
If your mobile device disconnects (approximately six minutes after using Wi-Fi Direct), try the one-push method using WPS and set the Brother machine as a G/O.
Wi-Fi Direct
Your Brother machine is placed too far from your mobile device.
Move your Brother machine within about 3.3 feet (1 meter) of the mobile device when you configure the Wi-Fi Direct network settings. Move your Brother machine within about 3.3 feet (1 meter) of the mobile device when you configure the Wi-Fi Direct network settings.
Wi-Fi Direct
There are some obstructions (walls or furniture, for example) between your machine and the mobile device.
Move your Brother machine to an obstruction-free area.
Wi-Fi Direct
There is a wireless computer, Bluetooth-supported device, microwave oven, or digital cordless phone near the Brother machine or the mobile device.
Move other devices away from the Brother machine or the mobile device.
Wi-Fi Direct
If you have checked and tried all of the actions, but still cannot complete the Wi-Fi Direct configuration.
Turn your Brother machine off and back on. Then try to configure the Wi-Fi Direct settings again.
If you are using your Brother machine as a client, confirm how many devices are allowed in the current Wi-Fi Direct network, and then check how many devices are connected.
