MFC-J6935DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.

Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software.

MFC-J6530DW/MFC-J6730DW

  1. Load your document.
  2. Press [Scan]>[to PC]>[to File].
  3. If the machine is connected over the network, press or to display the computer where you want to send data, and then press the computer name.

    If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].

  4. Do one of the following:
    • To change the settings, press [Options], and then go to the next step.
    • Press [Start] to start scanning without changing additional settings.

      The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

  5. Select the scan settings you want to change, and then press [OK].
    Option
    Description
    Scan Type

    Select the scan type for your document.

    Resolution

    Select the scan resolution for your document.

    File Type

    Select the file format for your document.

    Document Size

    Select your document size.

    Brightness

    Select the brightness level.

    Contrast

    Select the contrast level.

    ADF Auto Deskew

    (Available only for certain models)

    Correct any skewed documents when they are scanned using the ADF.

    Skip Blank Page

    (Available only for certain models)

    When On is selected, blank pages are skipped.

    Remove Background Color

    Change the amount of background color that is removed.

    • To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make this a One Touch Shortcut. Follow the LCD instructions.
  6. Press [Start].

    The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

MFC-J6535DW/MFC-J6930DW/MFC-J6935DW

  1. Load your document.
  2. Press [Scan].
  3. Swipe left or right or press or to display [to PC].
    The icon moves to the middle of the Touchscreen and is highlighted in blue.
  4. Press [to PC].
  5. Press [to File].
  6. If the machine is connected over the network, swipe up or down or press or to display the computer where you want to send the data, and then press the computer name.

    If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].

  7. Do one of the following:
    • To change the settings, press [Options], and then go to the next step.
    • Press [Start] to start scanning without changing additional settings.

      The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

  8. To scan both sides of the document (for MFC-J6930DW/MFC-J6935DW only), press [2-sided Scan], and then select the document type.
    Option
    Description
    2-sided Scan: Long Edge

    Scan the document so that the pages are read by flipping them on the long edge.

    2-sided Scan: Short Edge

    Scan the document so that the pages are read by flipping them on the short edge.

  9. Select the scan settings you want to change, and then press [OK].
    Option
    Description
    Scan Type

    Select the scan type for your document.

    Resolution

    Select the scan resolution for your document.

    File Type

    Select the file format for your document.

    Document Size

    Select your document size.

    Brightness

    Select the brightness level.

    Contrast

    Select the contrast level.

    ADF Auto Deskew

    (Available only for certain models)

    Correct any skewed documents when they are scanned using the ADF.

    Skip Blank Page

    (Available only for certain models)

    When On is selected, blank pages are skipped.

    Remove Background Color

    Change the amount of background color that is removed.

    • To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make this a One Touch Shortcut. Follow the LCD instructions.
  10. Press [Start].
    The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J6530DW, MFC-J6535DW(XL), MFC-J6930DW, MFC-J6935DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.