MFC-9560CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

Scan a document and save the scanned image to a folder on a local or network hard disk using the SCAN key on my Brother machine

You can scan a document and save the scanned image to a preferred folder by pressing the SCAN key on the control panel of your Brother machine.

* If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

If you want to change the scan settings, click here to see the details of how to change scan settings.

  1. Load your document.
    If you want to use 2-sided(duplex) scanning, load your document face up, top edge first in the ADF.
  2. Press SCAN.
  3. Press the UP OR DOWN ARROW key to choose Scan to PC. Press OK.
  4. Press the UP OR DOWN ARROW key to choose File. Press OK.
  5. Press the UP OR DOWN ARROW key to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK.
  6. (For network users)
    1. Press the UP OR DOWN ARROW key to choose the destination computer you want to receive the data.
      Note:
      If the computer is not displayed, click here to see how to solve the issue.
    2. Press OK.
    3. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer on the control panel and press OK.
  7. Press Black (Mono) Start or Color (Colour) Start or Start.
<For touchscreen models>
  1. Load your document.
    If you want to use 2-sided(duplex) scanning, load your document face up, top edge first in the ADF.
  2. Press Scan.
  3. Press Scan to PC.
  4. Press File.
  5. (For network users)
    1. Press the UP OR DOWN ARROW key to display the destination computer you want to receive the data.
      Note:
      If the computer is not displayed, click here to see how to solve the issue.
    2. Press the destination computer and press OK.
    3. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer on the control panel, and press OK.
  6. Do one of the following:
  7. Press Duplex Scan.
    Press DuplexScan :LongEdge or DuplexScan :ShortEdge.
  8. Press Black (Mono) Start or Color (Colour) Start or Start.

You can scan from your computer with the useful application as ControlCenter. Please refer to related FAQ's about how to use the ControlCenter with Windows/ Macintosh.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-9560CDW, MFC-9970CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.