MFC-8950DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/09/2012
  • ID: faq00002411_015

Cover is Open

Check the following to clear the message:


NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.


  • The front cover is not completely closed. Close the front cover of the machine.

    Front cover

  • The ADF cover is not completely closed. Close the ADF cover of the machine.

    ADF cover

  • The ADF is open while loading a document. Close the ADF cover of the machine, then press Stop/Exit.

  • The fuser cover (1) is not completely closed or paper was jammed in the back of the machine when you turned on the power.  Make sure paper is not jammed inside the back of the machine, and then close the fuser cover (1) and press Start.

    Fuser cover



 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit