MFC-9440CN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 02/28/2007
  • ID: faq00000694_004

How do I clear the message "Document Jam" from the LCD display?

The document may get jammed if it is not inserted or fed properly, or if the document scanned from the ADF is too long.
Follow the steps below to clear a document jam.


If the document is jammed in the top of the ADF unit

  1. Take out any paper from the ADF that is not jammed.
  2. Open the ADF cover.
  3. Pull the jammed document out to the left.
  1. Close the ADF cover.
  2. Press Stop/Exit.

If the document is jammed under the document cover

  1. Take out any paper from the ADF that is not jammed.
  2. Lift the document cover.
  3. Pull the jammed document out to the right.
  1. Close the document cover.
  2. Press Stop/Exit.

If the document is jammed at the output tray

  1. Take out any paper from the ADF that is not jammed.
  2. Pull the jammed document out to the right.
  1. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9040CN, MFC-9440CN, MFC-9450CDN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit