Model discontinued. This page is no longer updated.

MFC-7225N

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I store received faxes in memory?

If you set Fax Storage to ON, your FAX/MFC will hold all incoming faxes in memory until either you opt to print or delete them. The LCD will indicate when you have a fax stored in memory. Additionally, if there is paper in your machine and Fax Storage is enabled, then your FAX/MFC will automatically print each fax as it is received into memory. This is a safety feature to ensure that you will have a backup copy of each fax in case the machine loses power and the messages are lost.

 

To turn Fax Storage ON, please follow these steps:

 


  1. Press Menu/Set.
  2. Press the up or down navigation key until Fax appears and press Menu/Set.
  3. Press the up or down navigation key until Remote Fax Opt appears and press Menu/Set.
  4. Press the up or down navigation key until Fwd/Page/Store or Forward/Store appears and press Menu/Set.
  5. Use the up or down navigation key to select Fax Storage (or Off if you wish to disable Fax Storage). Press Menu/Set to confirm your choice.
  6. Press Stop/Exit to exit the menu.

If you set the remote fax options to Off and received faxes are left in your FAX/MFC memory, follow the LCD messages that appear after Step 6.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FAX-2820, FAX-2910, FAX-2920, MFC-7220, MFC-7225N, MFC-7420, MFC-7820N, MFC-9420CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.