MFC-L9610CDN
FAQs & Troubleshooting |
Paper is Jammed in the Back of the Machine
If the machine's control panel or the Status Monitor indicates that there is a jam in the back of the machine (Jam Rear), do the following:
- Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
- Open the back cover.
- Pull the tabs labeled "1" at the left and right sides toward you to release the fuser cover.
- WARNING
- HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.
- Use both hands to gently pull the jammed paper out of the machine.
- Close the fuser cover. Make sure the tabs labeled "1" at the left and right sides lock into place.
- Close the back cover until it locks in the closed position.
Content Feedback
To help us improve our support, please provide your feedback below.