Model discontinued. This page is no longer updated.

What kind of memory can I use?


This printer has 16 Megabytes of standard memory and 2 slots for optional expansion memory. The memory can be expanded up to 272 Megabytes by installing commercially available dual in-line memory modules (DIMMs). (The standard memory fitted can vary depending on the printer model and country.)

 

The following DIMMs have specifically been tested:

 

Size
Manufacture
No.
16 MB TECHWORKS PM-HP 16M-BR
32 MB TECHWORKS PM-HP 32M-BR
64 MB TECHWORKS PM-HP 64M-BR
128 MB TECHWORKS PM-HP 128M-BR

 

For more information, visit Techworks web site at http://www.techworks.com/

In general, the DIMM that can be used with the HL-2460 must have the following specifications:

 

 Type:  100 pin and 32 bit output
 CAS Latency:  2 or 3
 Clock frequency:  66 MHz or more
 Capacity:  16, 32, 64 MB or 128 MB
 Height:  46 mm (1.8 inches) or less
 Parity:  None
 DRAM Type:

 SDRAM 4 Bank
* SDRAM can be used.

For more information, consult with the dealer where you purchased the printer.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2460

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.