Model discontinued. This page is no longer updated.

What kind of memory can I use?


For HL-5040
This printer has 8 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 136MB by installing a commercially available DIMM (Dual In-line Memory Module).

For HL-5050 and HL-5070N
These printers have 16 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 144 MB by installing a commercially available DIMM (Dual In-line Memory Module).

The following DIMM size can be installed:

 

Size
Manufacture
No.
16 Mbyte TECHWORKS 12456-0001
32 Mbyte TECHWORKS 12457-0001
64 Mbyte TECHWORKS 12458-0001
128 Mbyte TECHWORKS 12459-0001

 

For more information, visit Techworks web site at http://www.techworks.com/

 

 

In general, the DIMM that can be used with the HL-5040, HL-5050 and HL-5070N must have the following specifications:

 

 Type:  100 pin and 32 bit output
 CAS Latency:  2 or 3
 Clock frequency:  66 MHz or more
 Capacity:  16, 32, 64 Mbyte or 128 Mbyte
 Height:  35 mm (1.4 inches) or less
 Parity:  None
 DRAM Type:  SDRAM 4 Bank

Additional memory is useful and may be necessary if you are using the Page Protection function.

For HL-5070N
You have to expand the printer memory by adding a DIMM to use the FTP/IPP protocol.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-5040, HL-5050, HL-5070N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.