MFC-8950DWT

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 04/26/2012
  • ID: faq00000151_034

Faint


Print Quality Problem - Faint

Please check the following points:

  • Take out the drum unit and toner cartridge assembly. Hold the assembly level with both hands and gently shake it from side to side several times to spread the toner evenly inside the cartridge.


    shake toner cartridge

  • Check the printer's environment. Conditions such as high humidity and high temperatures may cause faint print.
  • If the whole page is too light, Toner Save may be on. Turn off Toner Save Mode in the Advanced tab (For Windows) or the Advanced print settings of Print Settings (For Macintosh) of the driver. To see how to clean the corona wire, please refer to the FAQ "Turn the Toner Save mode on or off".
  • Put in a new toner cartridge. To see how to replace the toner cartridge, please refer to the FAQ "Replace Toner".
  • Clean the corona wire of the drum unit. To see how to clean the corona wire, please refer to the FAQ "Clean the corona wire".
  • Put in a new drum unit. To see how to replace the toner cartridge, please refer to the FAQ "Replace Drum".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-8110DN, DCP-8150DN, DCP-8155DN, HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit