Model discontinued. This page is no longer updated.

HL-5250DN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I disable the APIPA protocol?

If you want to reset the print server back to its default settings with APIPA protocol disabled, follow these steps:
  1. Turn off the printer.

  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down Go as you turn on the power switch. First all the LEDs will light up, and then the Status LED will turn off. Release Go. Make sure that all the LEDs have turned off.
  4. Press Go seven times. Make sure that all the LEDs light up to indicate that the print server has been reset to its default settings.
    • For more information on APIPA, see the Network User's Guide.
    • You can also disable the APIPA protocol using a web browser, BRAdmin Professional, BRAdmin Light or Web BRAdmin.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-5250DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.