MFC-J1170DW

FAQs & Troubleshooting

FAQs & Troubleshooting

What is the recommended paper?

You can use plain paper, inkjet paper (coated paper), glossy paper, recycled paper, and envelopes.

We recommend testing various paper types before buying large quantities.

For best results, use Brother paper.

 

  • When you print on inkjet paper (coated paper) and glossy paper, be sure to select the correct print media in the printer driver or in the application you use to print, or the Paper Type setting on the machine.
  • When you print on photo paper, load one extra sheet of the same photo paper in the paper tray.
  • When using photo paper, remove each sheet at once to prevent smudging or paper jams.
  • Avoid touching the printed surface of the paper immediately after printing; the surface may not be completely dry and may stain your fingers.

 

Paper Capacity of the Paper Trays

  Paper Size *1 Paper Types No. of Sheets

Paper Tray

A4, Letter, Legal, Mexico Legal, India Legal, Folio, Executive, B5 (JIS), A5, B6 (JIS), A6, Envelopes (C5, Com-10, DL, Monarch), Photo (4" x 6")/(10 x 15 cm), Photo 2L (5" x 7")/(13 x 18 cm), Index card (5" x 8")/(13 x 20 cm)

Plain Paper, Recycled Paper 150 *2
Inkjet Paper 20
Glossy Paper, Photo 20
Index Card 30
Envelopes 10

*1: Legal, Mexico Legal, India Legal, Folio, B5 (JIS) and B6 (JIS) size paper are supported only in some countries.

*2: When using plain paper 20 lb (80 g/m2)

 

Paper Weight and Thickness

Paper Type Weight Thickness
Cut-Sheet Cut-Sheet Plain Paper, Recycled Paper 17 to 32 lb (64 to 120 g/m2) 3 to 6 mil (0.08 to 0.15 mm)
Inkjet Paper 17 to 53 lb (64 to 200 g/m2) 3 to 10 mil (0.08 to 0.25 mm)
Glossy Paper *1 Up to 58 lb (Up to 220 g/m2) Up to 10 mil (Up to 0.25 mm)
Cards Photo Card *1 Up to 58 lb (Up to 220 g/m2) Up to 10 mil (Up to 0.25 mm)
Index Card Up to 53 lb (Up to 200 g/m2) Up to 6 mil (Up to 0.15 mm)
Envelopes 20 to 25 lb (80 to 95 g/m2) Up to 20 mil (Up to 0.52 mm)

*1: BP71 69 lb (260 g/m2) paper is specially designed for Brother inkjet machines.

 

Handle and Use Print Media

  • Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
  • Avoid touching the shiny (coated) side of photo paper.
  • Some envelope sizes require that you set margins in the application. Make sure you do a test print first before printing many envelopes.

DO NOT use the following types of paper:

 

  • Damaged, curled, wrinkled, or irregularly shaped
    *1: 0.08 in. (2 mm) or greater curl may cause jams to occur.
    image

     

  • Extremely shiny or highly textured
  • Paper that cannot be arranged uniformly when stacked
  • Paper made with a short grain

DO NOT use envelopes that:

  • Are loosely constructed
  • Have windows
  • Are embossed (have raised writing on them)
  • Have clasps or staples
  • Are pre-printed on the inside
  • Are self-adhesive
  • Have double flaps
    Self-adhesive Double flaps
    Self-adhesive Double flaps

You may experience paper feed problems caused by the thickness, size and flap shape of the envelopes you are using.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J1010DW, MFC-J1170DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.